Fogra is currently working with great commitment on modernising ISO 12647 and adapting it to current environmental conditions.
Important innovations of the reformed ISO 12647 will be:
- Innovations regarding paper types (PT)
- New tone value increases
- For proofing: New papers with optical brighteners
Why is ISO 12647 being revised? Environmental conditions have changed significantly at three central points since the last revision in 2004.
Papertypes
The previous paper types 3 and 5 with the paper whites defined in 2004 are hardly available on the market today. Even picture printing papers today show a much stronger blue colouration than just a few years ago. In addition, the revision of D50 in 2009 means that the lighting in the pressrooms now also contains considerably more UV than before 2009, which has caused problems in the matching of proofs without optical brighteners compared to papers with a high proportion of brighteners. Instead of the previous 5 paper types, there will probably now be 8 new paper types which also differentiate between glossy and matte picture printing paper:
- PT1: Coated picture printing paper (Premium coated)
- PT2: Brightened, coated picture printing paper (Improved coated)
- PT3: Glossy coated magazine paper (Standard coated glossy)
- PT4: Matte coated magazine paper (standard coated mat)
- PT5: Wood free uncoated
- PT6: Supercalendered, uncoated
- PT7: Improved uncoated paper
- PT8: Standard uncoated
Based on these eight types of paper, a total of 16 printing conditions are created by using frequency modulated non-periodic screening and conventional periodic screening.
But not only the paper types are being adapted to the new era: The dot gain curves will also be adapted to the new conditions. The filmless printing plate production that is common today results in a higher dot gain in the bright highlights than before. Therefore, new dot gain curves have been defined that are now also valid for all colours of a printing condition. For black and cyan, magenta and yellow the same increase curves now apply for the same printing condition. Current investigations show that the black ink does not really print ” richer ” than the chromatic colors.
The revised ISO 12647 will also contain innovations for proofing. As Fogra writes, “Papers with a high proportion of optical brighteners can only be simulated with test printing substrates […] that also contain optical brighteners. A metrological equality also looks the same to the eye, according to Fogra’s conclusion, if the UV components of colour measurement and colour matching are identical. The investigations for the softproof have not yet been completed.
More articles related to this topic:
Even almost 9 years after the introduction of the successor colour space PSOCoatedV3, ISOCoatedV2 / FOGRA39 is still the most widespread colour space in Europe. We at Proof GmbH count around 200 jobs from time to time for the German Printing and Media Industries Federation, among others. In the last count, proofs in ISOCoatedV2 accounted for around 68% of all proof jobs at our company. This is a clear sign of the continued widespread use of the colour space. ISOCoatedV2: From the classic colour space to the beacon of the …
Read more
After Eddy Hagen pointed out in this posts, that there were some major colour deviations between the brand new PANTONE Solid Coated Guide 2023 and the previous version especially for the PANTONE 2635 C, I was curious to lookup the same colours in the new PANTONE Color Bridge Coated Guide of 2023 and compare the colours with the previous version. I measured a dE00 of 8,15 between the two colours that Eddy mentioned, which is really far apart from how accurate PANTONE colours should match between the different PANTONE guides. …
Read more
Several errors have crept into the new PANTONE 2023 fan decks. In both the PANTONE Solid Coated and the Solid Uncoated color fans, there are colours for which the new ink formulations are incorrect. In the PANTONE Formula Guide Solid Coated fan 2023, PANTONE 107 C and PANTONE 108 C have absolutely identical ink recipes, as well as PANTONE 113 C and PANTONE 114 C. As the colors differ, this cannot be the correct. Several errors in the PANTONE Solid Uncoated fan 2023 In the PANTONE Solid Uncoated fan 2023 …
Read more
Over the last few months, we at Proof.de have been thinking about further improving our already very good colour measurement technology in terms of speed and measurement precision. Relatively quickly it became clear that only two devices would come into question: The KonicaMinolta MYIRO-9, the successor of the former FD-9, or the X-Rite ISIS 2 XL. The starting point: Since we at Proof GmbH have 5 proofing devices, the calibration of targets for profile optimisation is a time-critical undertaking for us. Therefore, we had been looking around for an upgrade of …
Read more
In the current issue of Fogra News “Fogra Aktuell” Proof GmbH is involved in two places. Firstly, a summary of the Fogra report on our first FOGRA55 certification for seven-colour printing with extended colour space in CMYKOGV appeared. You can also find more information on our FOGRA55 certification on the Fogra website: https://fogra.org/en/press-releases/fogracert-erste-cpc-zertifizierung-fuer-fogra55-cmykogv-330 and on proofing.de: And secondly, there was a report on the completion of the research project for textile digital printing, FOGRA58, in which we were allowed to investigate and test the proof capability of the new textile …
Read more
Whether it’s a large global corporation or a small company, the following often applies to designs or redesigns today: we develop everything for digital first.
A few days ago Proof GmbH was the first company to be certified for proofing for the new 7C exchange colour space FOGRA55. Fogra has developed characterisation data for extended multicolour printing with the printing colours CMYKOGV – i.e. cyan, magenta, yellow, black (contrast), orange, green and violet – FOGRA55 as part of a research project over the past few years. The characterisation data and the ICC profile Ref-ECG-CMYKOGV_FOGRA55_TAC300.icc have been published on the Fogra website in recent weeks. We have now carried out the certification via GMG ColorProof, as …
Read more
From now on you can order proofs for metal decor printing on white sheet metal at proof.de: The ICC profile for Fogra60 is Metal-Printing_MPC1_FOGRA60.icc
Peter Jäger is an expert in colour management that reliably works across the boundaries of printers and monitors, web and print – essentially: cross-media.
In this short image video we – the Proof GmbH – introduce us and our work. Find out who we are and what drives us. What do you think of our short film?
Offset and Newsprint ISO Coated v2 (ECI) / ISO Coated v2 300% (ECI) Profile: ISOcoated_v2_eci.icc Standard for glossy and matte coated paper Paper: Types 1 and 2, gloss and matte coated Tone value increase curves A (CMY) and B (K) as defined in ISO 12647-2:2004 Characterisation Data: FOGRA39L ISOUncoated Profile: ISOUncoated.icc Standard for uncoated white natural paper Paper: paper grade 4, uncoated white offset, dot gain curves C (CMY) and D (K) from ISO 12647-2: 2004 Characterisation Data: FOGRA29L PSOCoatedV3 / Fogra 51 Profile: PSOcoated_v3.icc The successor of ISOCoatedV2 for glossy …
Read more
In 2021 proof.de was again Fogra certified including Fogra “Spot cert” certification, i.e. for the display of spot colours such as PANTONE C and U.
Shortly after Adobe’s announcement to remove PANTONE colours from their products, PANTONE removed the popular PANTONE Find a Color from their website
The announcement was hot: As of March 2022, Adobe software products will no longer contain PANTONE colour libraries. What follows now? Who loses, who wins?
The future speaks PDF 2.0: Only recently the ISO published a new revision of PDF 2.0, with which the new printing standard PDF/X-6 also takes shape.
The sphere head technology and the differences between SCI / SPIN or SCE / SPEX are explained using the measurement of glossy and diffuse objects.
We now have more environmentally friendly parcel labels for our shipping sleeves: Instead of PVC, we use offset-printed paper labels.
Proof GmbH is a member of Fogra – Forschungsinstitut für Medientechnologien e.V.. Why? In recent years, we have been able to draw on the support of Fogra with numerous projects, or work together with Fogra, for example for Fogra58 beta – Textile-RGB (where Matthias Betz was also able to report on our experiences as a speaker at the Fogra Colour Management Symposium 2020 in Munich as part of the presentation “Proofing of Fogra58beta”) or have contributed test prints and proofs to the research project “11.004L – Improving the printability …
Read more
Proof printer of the latest generation – now available at Proof.de: The new EPSON SureColor P9500 Spectroproofer. More speed for large proof jobs.
Once again we passed the Fogra certifications and were even the first company to be certified with the Fogra “Spot cert” for Fogra59 eciCMYK-V2.